How do I get started with bug bounty hunting? How do I improve my skills?
These are some simple steps that every bug bounty hunter can use to get started and improve their skills:
Learn to make it; then break it! A major chunk of the hacker's mindset consists of wanting to learn more. In order to really exploit issues and discover further potential vulnerabilities, hackers are encouraged to learn to build what they are targeting. By doing this, there is a greater likelihood that hacker will understand the component being targeted and where most issues appear. For example, when people ask me how to take over a sub-domain, I make sure they understand the Domain Name System (DNS) first and let them set up their own website to play around attempting to "claim" that domain.
Read books. Lots of books. One way to get better is by reading fellow hunters' and hackers' write-ups. Follow /r/netsec and Twitter for fantastic write-ups ranging from a variety of security-related topics that will not only motivate you but help you improve. For a list of good books to read, please refer to "What books should I read?".
Join discussions and ask questions. As you may be aware, the information security community is full of interesting discussions ranging from breaches to surveillance, and further. The bug bounty community consists of hunters, security analysts, and platform staff helping one and another get better at what they do. There are two very popular bug bounty forums: Bug Bounty Forum and Bug Bounty World.
Participate in open source projects; learn to code. Go to https://github.com/explore or https://gitlab.com/explore/projects and pick a project to contribute to. By doing so you will improve your general coding and communication skills. On top of that, read https://learnpythonthehardway.org/ and https://linuxjourney.com/.
Help others. If you can teach it, you have mastered it. Once you discover something new and believe others would benefit from learning about your discovery, publish a write-up about it. Not only will you help others, you will learn to really master the topic because you can actually explain it properly.
Smile when you get feedback and use it to your advantage. The bug bounty community is full of people wanting to help others so do not be surprised if someone gives you some constructive feedback about your work. Learn from your mistakes and in doing so use it to your advantage. I have a little physical notebook where I keep track of the little things that I learnt during the day and the feedback that people gave me.
Learn to approach a target. The first step when approaching a target is always going to be reconnaissance — preliminary gathering of information about the target. If the target is a web application, start by browsing around like a normal user and get to know the website's purpose. Then you can start enumerating endpoints such as sub-domains, ports and web paths.
A woodsman was once asked, "What would you do if you had just five minutes to chop down a tree?" He answered, "I would spend the first two and a half minutes sharpening my axe." As you progress, you will start to notice patterns and find yourself refining your hunting methodology. You will probably also start automating a lot of the repetitive tasks.
Are you tired of reading endless news stories about ethical hacking and not really knowing what that means? Let's change that!
This Post is for the people that:
Have No Experience With Cybersecurity (Ethical Hacking)
Have Limited Experience.
Those That Just Can't Get A Break
OK, let's dive into the post and suggest some ways that you can get ahead in Cybersecurity.
I receive many messages on how to become a hacker. "I'm a beginner in hacking, how should I start?" or "I want to be able to hack my friend's Facebook account" are some of the more frequent queries. Hacking is a skill. And you must remember that if you want to learn hacking solely for the fun of hacking into your friend's Facebook account or email, things will not work out for you. You should decide to learn hacking because of your fascination for technology and your desire to be an expert in computer systems. Its time to change the color of your hat 😀
I've had my good share of Hats. Black, white or sometimes a blackish shade of grey. The darker it gets, the more fun you have.
If you have no experience don't worry. We ALL had to start somewhere, and we ALL needed help to get where we are today. No one is an island and no one is born with all the necessary skills. Period.OK, so you have zero experience and limited skills…my advice in this instance is that you teach yourself some absolute fundamentals.
Let's get this party started.
What is hacking?
Hacking is identifying weakness and vulnerabilities of some system and gaining access with it.
Hacker gets unauthorized access by targeting system while ethical hacker have an official permission in a lawful and legitimate manner to assess the security posture of a target system(s)
There's some types of hackers, a bit of "terminology". White hat — ethical hacker. Black hat — classical hacker, get unauthorized access. Grey hat — person who gets unauthorized access but reveals the weaknesses to the company. Script kiddie — person with no technical skills just used pre-made tools. Hacktivist — person who hacks for some idea and leaves some messages. For example strike against copyright.
A step by step lab based mini course on analyzing your car network
I wanted to learn about hacking cars. As usual I searched around the internet and didn't find any comprehensive resources on how to do this, just bits and pieces of the same info over and over which is frustrating. I am not a car hacking expert, I just like to hack stuff. This mini course will run in a fully simulated lab environment available from open garages, which means in 5 minutes from now you can follow along and hack cars without ever bricking your girlfriends car. Since you obviously wouldn't attack your own Lambo, totally use your girlfriends Prius.
Below are the topics covered in this blogseries so you can decide if you want to read further:
Whats covered in this car hacking mini course:
Setting up Virtual Environments for testing
Sniffing CAN Traffic
Parsing CAN Traffic
Reverse Engineering CAN IDs
Denial of service attacks
Replaying/Injecting Traffic
Coding your own CAN Socket Tools in python
Targeted attacks against your cars components
Transitioning this to attacking a real car with hardware
The first thing we are going to do before we get into any car hacking specifics such as "WTF is CAN?", is get your lab up and running. We are going to run a simple simulated CAN Bus network which controls various features of your simulated car. Its better to learn by doing then sit here and recite a bunch of car network lingo at you and hope you remember it.
I also don't want you to buy a bunch of hardware and jack into your real car right away. Instead there are options that can get you started hacking cars RIGHT NOW by following along with this tutorial. This will also serve to take away the fear of hacking your actual car by understanding what your doing first.
Video Playlist:
Setting up your Lab:
First things first, set yourself up with an Ubuntu VMware install, and load it up. Optionally you could use a Kali Iinux VM, however, that thing drives me nuts with copy paste issues and I think Kayak was giving me install problems. So support is on you if you would like to use Kali. However, I do know Kali will work fine with OpenGarages virtual car.. So feel free to use it for that if you have it handy and want to get started right away.
Install PreReq Libraries:
Once you load this up you are going to want to install CAN utilities and pre-requisite libraries. This is really easy to do with the following Apt-get commands:
Once this is done we can startup the simulator by changing directories to the downloaded repo and running the following 2 commands, which will setup a virtual CAN interface and a simulator GUI Cluster:
Run the setup Script to get the vcan0 interface up:
root@kali:~/ICSim# ./setup_vcan.sh
root@kali:~/ICSim# ./icsim vcan0
On a new terminal tab we will open up our simulators controller with the following command,
root@kali:~/ICSim#./controls vcan0
Note: that the controller must be the in-focus GUI screen to send keyboard commands to the simulator.
How to Use the Simulator:
The simulator has a speedometer with Right and Left turn signals, doors etc. Below are the list of commands to control the simulator when the Control panel is in focus. Give them each a try and note the changes to the simulator.
Up and Down keys control the gauges clusters speedometer
Left and Right keys Control the Blinkers
Right Shift + X, A or B open doors
Left Shift + X, A or be Close doors
Try a few of the above commands for example Right Shift +X and you will see the interface change like so, notice the open door graphic:
Awesome, thanks to OpenGarages you now you have your very own car to hack
Notice in the setup commands above we used a VCan0 interface. Run Ifconfig and you will now see that you indeed have a new network interface that speaks to the CAN network over VCan0.
ficti0n@ubuntu:~/Desktop/ICSim$ ifconfig vcan0
vcan0 Link encap:UNSPECHWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
Car networks run on a variety of protocols most prevalent being CAN. You can think of a CAN Bus like an old school networking hub where everyone can see everyone elses traffic. This is true to some extent although you may not see all of the cars traffic if its not connected to that particular bus your plugged into. You can think of CAN traffic kind of like UDP in that its send and forget, the main difference being parts of the CAN bus network don't actually have addresses and everything runs off arbitration IDs and priorities. Thats enough background to get you doing rather then reading.
With a little knowledge out of the way lets check if we can see our CAN traffic from our virtual car via the CanDump utility, which you installed as part of CanUtils package above. Using the following command on the vcan0 interface our simulator uses you can view a stream of traffic:
ficti0n@ubuntu:~/Desktop/ICSim$ candump vcan0
Above we can see a bunch of CAN frames, and if we perform actions on the vehicle we will see changes to data values in the CanDump output.However this may happen very fast, and we may not be able to see if for example we unlocked our simulators door. This is because things are changing constantly in the cars IDLE state. One single value changing may not stand out enough for us to take notice or may scroll so fast we cant see it.
Capture and Replay CAN Actions:
One option would be to perform an action and replay it, we should see the actions happen again in the replay if the traffic for the action we recorded is on the same bus network our device is plugged into. There are loads of networks within a car and its not guaranteed our network tap for example an OBD2 port plugin is connected to the same network as door we opened.Or the door may not be connected to the network at all depending on your car and its age or how its configured.
Replaying dumps with CanPlayer:
Another useful tool included with CanUtils package is CanPlayer for replaying traffic. If the functionality we are trying to capture is on the same Bus as the adaptor plugged into the car, or in this case our Virtual CAN interface, we can use CanDump to save traffic to a file. We then use CanPlayer to replay the traffic on the network. For example lets run CanDump and open a door and then replay the functionality with CanPlayer.
Lab 1 Steps:
Run CanDump
Right Shift + X to open a door
Cancel CanDump (ctrl+c)
Left Shift + X to close the door
Run can player with the saved dump and it will replay the traffic and open the door
Recording the door opening:(-l for logging)
ficti0n@ubuntu:~/Desktop/ICSim$ candump -l vcan0
Replaying the CanDump file:(use the file your can dump created)
Nice, so if all went well you should see that your door is now open again. If this did not happen when attacking a real car, just try to replay it again. CAN networks are not like TCP/IP, they are more like UDP in that you send out your request and its not expecting a response. So if it gets lost then it gets lost and you have to resend. Perhaps something with higher priority on the network was sending at the time of your replay and your traffic was overshadowed by it.
Interacting with the Can Bus and Reversing Traffic:
So thats cool, but what about actually understanding what is going on with this traffic, CanDump is not very useful for this, is scrolls by to quickly for us to learn much from.Instead we can use CanSniffer with colorized output to show us the bytes within packets that change. Below is an example of CanSniffer Traffic:
You will see 3 fields, Time, IDand Data. Its pretty easy to figure out what these are based on thier name. The most important part for our usage in this blog are the ID and the Data fields.
The ID field is the frame ID which is loosely associated with the device on the network which is effected by the frame being sent. The ID to also determines the priority of the frame on the network.The lower the number of the CAN-ID the higher priority it has on the network and more likely it will be handled first.The data field is the data being sent to change some parameter like unlocking a door or updating output. You will notice that some of the bytes are highlighted RED. The values in red are the values that are changing during the idle state you are currently in.
Determine which ID and Byte controls the throttle:
So with the terminal sniffing window open put the simulator and the controller into the foreground, with the controller being the window you have clicked and selected.Pay attention to the CanSniffer output while hitting the UP ARROW and look for a value that was white but is now Red and increasing in value as the throttle goes up.This might take you a few minutes of paying attention to whats going on to see.
The following 2 pictures show ID 244 in the IDLE state followed by pressing the up button to increase the speed. You will notice a byte has turned red and is increasing in value through a range of HEX values 0-F. It will continue to enumerate through values till it reaches its max speed.
The byte in ID 244 which is changing is the value while the throttle is engaged, so 244 associated in some way with the increasing speed. The throttle speed is a good value to start with as it keeps increasing its value when pressed making it easier to spot while viewing the CanSniffer output.
Singling out Values with Filters:
If you would like to single out the throttle value then click the terminal window and press -000000 followed by the Enter key which will clear out all of the values scrolling. Then press +244 followed by the Enter key which will add back the throttle ID. You can now click the controller again and increase the speed with your Up arrow button without all the noise clouding your view.You will instead as shown below only have ID 244 in your output:
To get back all of the IDs again click the terminal window and input +000000 followed by the Enter key. Now you should see all of the output as before.Essentially 000000 means include everything. But when you put a minus in front of it then it negates everything and clears your terminal window filtering out all values.
Determine Blinker ID:
Now lets figure out another ID for the blinkers. If you hit the left or right arrow with the controls window selected you will notice a whole new ID appears in the list, ID 188 shown in the picture below which is associated with the blinker.
This ID was not listed before as it was not in use within the data output until you pressed the blinker control.Lets single this value out by pressing -000000 followed by +188. Just like in the throttle example your terminal should only show ID 188, initially it will show with 00 byte values.
As you press the left and the right blinker you will see the first Byte change from 00 to 01 or 02. If neither is pressed as in the screenshot above it will be 00. Its kind of hard to have the controller in focus and get a screenshot at the same time but the ID will remain visible as 00 until it times out and disappears from the list when not active. However with it filtered out as above you can get a better view of things and it wont disappear.
Time for YOU to do some Protocol Reversing:
This lab will give you a good idea how to reverse all of the functionality of the car and associate each action with the proper ID and BYTE. This way you can create a map of intended functionality changes you wish to make.Above we have done a few walk throughs with you on how to determine which byte and ID is associated with an action. Now its time to map everything out yourself with all the remaining functionality before moving on to attacking individual components.
Lab Work Suggestion:
Take out a piece of paper and a pencil
Try unlocking and locking doors and write down the ID which controls this action (remember your filters)
Try unlocking each door and write down the BYTES needed for each door to open
Try locking each doors and what Bytes change and what are their values, write them down
Do the same thing for the blinkers left and right (Might be different then what I did above)
What ID is the speedometer using?What byte changes the speed?
Attacking Functionality Directly:
With all of the functionality mapped out we can now try to target various devices in the network directly without interacting with the controllers GUI. Maybe we broke into the car via cellular OnStar connectionor the center console units BLE connection which was connected to the CAN network in some way. After an exploit we have direct access to the CAN network and we would like to perform actions. Or maybe you have installed a wireless device into an OBD2 port under the dashboard you have remote access to the automobile.
Using the data from the CAN network reversing lab above we can call these actions directly with the proper CAN-ID and Byte.Since we are remote to the target we can't just reach over and grab the steering wheel or hit the throttle we will instead send your CAN frame to make the change.
One way we can do this is via the CanSend utility. Lets take our information from our lab above and make the left turn signal flash with the following ID 188 for the turn signal by changing the first byte to 01 indicating the left signal is pressed. CanSend uses the format ID#Data. You will see this below when sending the turn signal via CanSend.
You should have noticed that the left signal flashed. If not pay more attention and give it another try or make sure you used the correct ID and changed the correct byte.So lets do the same thing with the throttle and try to set the speed to something with ID 244 that we determined was the throttle.
My guess is that nothing happened because its so fast the needle is not going to jump to that value. So instead lets try repeating this over and over again with a bash loop which simply says that while True keep sending the throttle value of 11 which equates to about 30mph:
ficti0n@ubuntu:~/Desktop/ICSim$ while true; do cansend vcan0 244#00000011F6;done
Yes thats much better, you may notice the needle jumping back and forth a bit. The reason the needle is bouncing back and forth is because the normal CAN traffic is sent telling the car its actually set to 00 in between your frames saying its 30mph.But it worked and you have now changed the speed the car sees and you have flashed the blinker without using the cars normal blinker controls. Pretty cool right?
Monitor the CAN Bus and react to it:
Another way to handle this issue is to monitor the CAN network and when it sees an ID sent it will automatically send the corresponding ID with a different value.. Lets give that a try to modify our speed output by monitoring for changes. Below we are simply running CanDump and parsing for ID 244 in the log output which is the throttle value that tells the car the speed. When a device in the car reports ID 244 and its value we will immediately resend our own value saying the speed is 30mph with the value 11.See below command and try this out.
ficti0n@ubuntu:~/Desktop/ICSim$ candump vcan0 | grep " 244 " | while read line; do cansend vcan0 244#00000011F6; done
With this running after a few seconds you will see the speed adjust to around 30MPH once it captures a legitimate CAN-ID 244 from the network traffic and sends its own value right after.
Ok cool, so now while the above command is still running click the controller window and start holding down the Up arrow with the controller in focus.. After a few seconds or so when the speed gets above 30MPH you will see the needle fighting for the real higher value and adjusting back to 30MPH as your command keeps sending its on value as a replacement to the real speed.
So thats one way of monitoring the network and reacting to what you see in a very crude manner.Maybe someone stole your car and you want to monitor for an open door and if they try to open the door it immediately locks them in.
Conclusion and whats next:
I am not an expert car hacker but I hope you enjoyed this. Thats about as far as I want to go into this subject today, in the next blog we will get into how to code python to perform actions on the CAN network to manipulate things in a similar way.With your own code you are not limited to the functionality of the tools you are provided and can do whatever you want. This is much more powerful then just using the CanUtils pre defined tools. Later on I will also get into the hardware side of things if you would like to try this on a real car where things are more complicated and things can go wrong.
"DirBuster is a multi threaded java application designed to brute force directories and files names on web/application servers. Often is the case now of what looks like a web server in a state of default installation is actually not, and has pages and applications hidden within. DirBuster attempts to find these. However tools of this nature are often as only good as the directory and file list they come with. A different approach was taken to generating this. The list was generated from scratch, by crawling the Internet and collecting the directory and files that are actually used by developers! DirBuster comes a total of 9 different lists (Further information can be found below), this makes DirBuster extremely effective at finding those hidden files and directories. And if that was not enough DirBuster also has the option to perform a pure brute force, which leaves the hidden directories and files nowhere to hide! If you have the time ;) " read more...
Give gifts this holiday season that inspires your favorite hackers to make something great. Our ten top picks for gifts to make 'em smile are perfect for hackers of all styles, ages, and interests.
Holiday gift guides always struggle when faced with nailing down a list for hackers — that's because hackers are as diverse in their interests and fascinations as they are diverse in gender, color, size and everything else. Someone with a multi-focused set of curiosity and unique gifts for finding out what makes the crackable crack may seem like a daunting individual to stuff a stocking for … but don't fret. With a keen eye on the latest interests in hacker culture, we've got a gift guide that can make the hacker in your life smile as they enjoy using your gift to hack and explore throughout the coming year.
Anonymity online: The Onion Pi
One of the most popular "snake oil" (fake) privacy gadgets is the so-called "Tor in a box" — a plug-and-play gadget that promises to make you anonymous online. Nearly all of these are made by clueless charlatans whose products put you at risk for privacy and security breaches. But your favorite hacker can just make or build an "Onion Pi" for $69.95, and with this free tutorial.
Attribution Dice
With Attribution Dice ($20), anyone can be a high-priced security consultant, and predict breach headlines before PR firms have a chance to feed them to reporters! With every security breach, hackers roll their eyes when headlines and PR firms roll out the same old, same old terms, methods and culprits. Instead of rolling eyes, your hacker can roll the dice, and wow friends, family, and neighbors with their hacker cyber-powers.
21 Bitcoin Computer
Money is always a welcome gift. Give the gift of going hands-on with Bitcoin with the 21 Bitcoin Computer. "The 21 Bitcoin Computer is ideal for buying and selling digital goods and services. You can use it to create bitcoin-payable APIs, set up your own personal digital goods store, pay people to share your content online, or host online games of skill." It's not cheap ($395) and comes with controversy, but it's a cool toy with a lot of potential, and 21 Inc. is going to be releasing an open source package for the device soon.
Gentleman's Bogota Lockpicks and Clear Practice Lock
Conventional wisdom suggests that all hackers know how to pick locks, but can they do it in style? A perfect stocking stuffer for slick hackers of all genders is the Gentleman's Bogota lockpick set ($34.95). These featherweights pin discreetly to a collar, hat, sleeve, vest, hemline, or wherever they choose. If the hacker you're shopping for wants to learn to lockpick, or just brush up on technique, throw in the clever Clear Practice Lock ($34.95).
Inverse Path USB Armory
In this reviewer's opinion, every hacker should have a USB Armory in their stocking this year. The Inverse Path USB Armory ($130) is a little USB stick with an entire computer onboard (800MHz ARM processor, 512MB RAM), designed to be a portable platform for personal security applications — and lives up to its reputation as "the Swiss Army Knife of security devices."
Hack the planet! The 20th anniversary of influential 1995 cyberpunk film "Hackers" was this year, and this cult classic got a special edition Blu-ray release, making it the must-have for the hackers in your life. The 20th anniversary "Hackers" Blu-ray features an hour-long "making of" documentary, rich video and audio transfer for the film itself, and interviews with: Cast members Matthew Lillard, Fisher Stevens, and Penn Jillette; hacking consultants Nicholas Jarecki and Emmanuel Goldstein; Director Iain Softley, and many more involved with the film's production and style.
A Hacker's hope for better sleep: The Re-Timer
Hackers are increasingly hacking themselves to make their own systems run better, and one thing hackers struggle with is their sleep cycles and feeling rested. Something that can help out is the Re-Timer ($299), a retro-future looking set of glasses and kit that adjusts the circadian rhythm and suppresses the body's production of melatonin (the sleepy hormone our bodies produce which makes us feel tired). Based on 25 years of research and on the market worldwide for three years, the Re-Timer has its own jet lag calculator app, as well as its Sleep App for Fitbit that makes a customized schedule based on actual sleep tracked.
USB Rubber Ducky Deluxe and LAN Turtle
A longtime favorite with hackers, penetration testers and IT professionals, the USB Rubber Ducky Deluxe ($42.99)is a cross-platform (Windows, Mac, Linux, Android) testing and experimentation device that is detected as a keyboard — imagine the possibilities. This stocking stuffer pairs well with its animal friend LAN Turtle ($50), a covert sysadmin and pentest tool for remote access, network intel gathering, and man-in-the-middle monitoring through a simple graphic shell (all in a generic USB ethernet adapter case).
TechShop Gift Certificate
Give the gift of hacking and making: A gift certificate to a TechShop. "Part fabrication and prototyping studio, part hackerspace, and part learning center, TechShop provides access to over $1 million worth of professional equipment and software. We offer comprehensive instruction and expert staff to ensure you have a safe, meaningful and rewarding experience." There are TechShops in Arizona, California, Michigan, Missouri, Pennsylvania, Texas, and Virginia/Washington, D.C. (some states have multiple locations). Future locations include St. Louis, MO and Paris, France.
Products to avoid
If you see these products, run! You're better off with a lump of coal. Don't waste precious holiday money on "snake oil" privacy and security products like these:
Every thing have some basic terminology and when you learn these basic things then you will be able to handle your work more easily.in the same case you Cannot learn C AND C++programing language in easy way if you does not know about the basic component of C AND C++ programming language it must be known those who really want to learn C programming language and want to be a programmer.
Basic of C AND C++ programming Language.
If you want to write a programme in C programming language then you must know about its basic rule that how to write a programme using C language. without these basics you Cannot write a programme using C language. C programming language have some basics component which is must be known every beginner who start to learn C programming language. some of the basic of C programming language is given below.
C language is develop by Dennis Ritchie in 1970. C is the hybrid of two previous programming language from B and BCPL. B ( basic ) and BCPL mean (basic Combine programming language) BCPL was develop by Martin Richard in 1967.
Character Set.
C and C++ contain three type of character set which are most important and basic element which are given below.
v Numeric Character.
v Alphabetic Character.
v Escape Character.
What Is Numeric Character.
Numeric Character are used for Calculation purpose and these are 0, 1, 2, 3, 4, 5, 6, 7, 8, 9.
What Is Alphabetic Character.
Alphabetic Character are used for naming a variable or writing programming or for user define words etc…
What is Escape Character.
Every language have some special Character which are used for special purpose C programming language have also some special Character which is Called Escape Character.
And these Escape Character are used for specific purpose.
'\' (backslash) is a special Character and is called escape Character.
If you use this '\' Character with n just like this ( \n ) then it tell the compiler that jump to the next line. It is used to leave the first line and start a new line.
Example
cout("asad \n mirza")
so when the programme is executed then it will print like
asad
mirza
How to Name a Variable.
There is some rule which are important to give a name to a variable.
In C and C++ language you can use A to Z alphabet to name a variable.
A = 5
Here A is a variable and 5 is value which is assign to it. You can also choose a name for assigning data with your own choice
forexample:
Weight=56
Age=29
Length=45
Pirce=50
Average=3.4
And so on
But keep in mind that
Ø variable name must be unique in the programme.
Ø Name of a variable is also called user define words.
Ø First letter of a variable must be written in capital words as above.
here
average=4.5 wrong
which is wrong variable and cause error because first alphabet of a variable must be start with capital words and here first alphabet is in lower case.
Ø Forexample
Average =5 right
Here Average is start with capital words so this is right.
Ø No space is allowed to name a variable only '_' is used in the place of space.
Age_of_ali=35 right
Becase under score'_' is used.
Age of ali=5 wrong
Because space ' ' is used.
Separate variable name with comma ', ' .
Ali,Rno,Phone_no; right
Comma is used between two variable.
Ali rno phone no wrong
Space is used between two variable.
Ø After name a variable in the last put simi colon ';' which is mean that the variable is ended.
Example :
void main()
{
int age,name,cotact_no;
}
How To Assign A Value To Variable
C and C++ provide you three data type for assigning a value to variables.
This three data type is.
· int
· float
· char
In C language equal sign '=' is used to assign a value to avariable it is also called assignment operator.
int data type is used for integer value. And thses are (0,1,2,3,4,5,5,6,7,8,9).
float is used for decimal point value. (0.1,3.4,5.9 ……..).
char is used to give a name to a variable or to give some text to variable.
(asad, copy, ali, reg_no, name……).
Keep in mind that the data type is case sensitive and must be given in lower case letter(a,b,c,…z).
